Home
 
 
My my My my
 
 
 
 
 
 
Important registration information

Please review the following prior to proceeding with online registration

Please ensure full payment is made at the time of registration. If payment is not made by December, 31rst, we will be forced to delete the registration. Should the registration be deleted, you will need to re-register your athlete and will be charged the current price and not the price you originally registered for.

Please ensure you upload documentation correctly. Documentation is reviewed and if incomplete or incorrect, we will notify you. We must have all documentation submitted in order for your athlete to be completely registered. Your athlete will be wait-listed until all documentation is turned in. Documentation is required legally and we are unable to allow athletes to participate without it.

If you are registering siblings, reach out to us directly. The volunteer deposit is different for siblings and unfortunately you will not be able to register online without being charged the full volunteer deposit for each registered sibling. You can reach us at suisunlittleleague@gmail.com. 

Tips for uploading documents:
1. Scan documents and upload as required
2. Take a picture of each document, email it to yourself and save the attachments/pictures. Upload the documents as required. 

If your child participated in All-Stars last season you DO need to turn in all required information. While we do have it on file, we need to ensure we have current information such as residency and dated material (medical release form, etc.).

 


by posted 12/03/2017
Please Provide Us With Your Feedback!

Suisun American Little League wants your feedback!

 

If you have an issue you'd like to report regarding the WebSite or the League, please describe the issue, providing as much information as possible. Please also provide us with your contact information so we may reach out to you and work through a resolution. We cannot fix what is broken if we do not have the details. 

Your feedback is important to us. We will use it to improve our overall processes and your experience. 

Thank you for your participation,

S.A.L.L.


by posted 11/30/2017
2018 Little League Bat Standards

For a list of FAQ's and additional 2018 Little League Bat Standards information, visit littleleague.org

 

Rule 1.10 - Baseball

The bat must be a baseball bat which meets the USA Baseball Bat standard (USABat) as adopted by Little League. It shall be a smooth, rounded stick, and made of wood or of material and color tested and proved acceptable to the USA Baseball Bat standard (USABat).

Beginning with the 2018 season, non-wood and laminated bats used in the Little League (Majors) and below, Intermediate (50-70) Division, Junior League divisions, and Challenger division shall bear the USA Baseball logo signifying that the bat meets the USABat – USA Baseball’s Youth Bat Performance Standard. All BPF – 1.15 bats will be prohibited beginning with the 2018 season. Additionally, starting in 2018, the bat diameter shall not exceed 2⅝ inches for these divisions of play. Additional information is available at LittleLeague.org/batinfo.

Tee Ball:

Under the USABat standard, certified Tee Ball bats (26" and shorter) will feature the USA Baseball mark and text which reads ONLY FOR USE WITH APPROVED TEE BALLS. All Tee Ball bats must feature the USA Baseball mark and accompanying text. Tee Ball bats that were produced and/or purchased prior to the implementation of the new standard can be certified using an Approved Tee Ball Sticker via the USA Baseball Tee Ball Sticker Program (USABaseballShop.com) beginning September 1, 2017.

Minor/Major Divisions:

It shall not be more than 33 inches in length; nor more than 2⅝ inches in diameter, and if wood, not less than fifteen-sixteenths (15/16) inches in diameter (7/8 inch for bats less than 30") at its smallest part. Wood bats taped or fitted with a sleeve may not exceed sixteen (16) inches from the small end.

NOTE: Solid one-piece wood barrel bats do not require a USA Baseball logo.

Intermediate (50-70) Division and Junior League:

It shall not be more than 34" inches in length; nor more than 2⅝ inches in diameter, and if wood, not less than fifteen-sixteenths (15/16) inches in diameter (7/8 inch for bats less than 30") at its smallest part. Wood bats taped or fitted with a sleeve may not exceed eighteen (18) inches from the small end.

NOTE: Solid one-piece wood barrel bats do not require a USA Baseball logo.

Senior League:

It shall not be more than 36 inches in length, nor more than 2⅝ inches in diameter, and if wood, not less than fifteen-sixteenths (15/16) inches in diameter (7/8 inch for bats less than 30") at its smallest part. Wood bats taped or fitted with a sleeve may not exceed eighteen (18) inches from the small end. The bat shall not weigh, numerically, more than three ounces less than the length of the bat (e.g., a 33-inch-long bat cannot weigh less than 30 ounces). All bats not made of a single piece of wood shall meet the Batted Ball Coefficient of Restitution (BBCOR) performance standard, and such bats shall be so labeled with a silkscreen or other permanent certification mark. The certification mark shall be rectangular, a minimum of a half-inch on each side and located on the barrel of the bat in any contrasting color. Aluminum/alloy and composite bats shall be marked as to their material makeup being aluminum/alloy or composite. This marking shall be silkscreen or other permanent certification mark, a minimum of one-half-inch on each side, and located on the barrel of the bat in any contrasting color.

Little League Challenger Division:

It shall not be more than 33 inches in length; nor more than 2⅝ inches in diameter, and if wood, not less than fifteen-sixteenths (15/16) inches in diameter (7/8 inch for bats less than 30”) at its smallest part. Wood bats taped or fitted with a sleeve may not exceed sixteen (16) inches from the small end.

NOTE: Solid one-piece wood barrel bats do not require a USA Baseball logo.

Senior League Challenger Division:

It shall not be more than 36 inches in length, nor more than 2⅝ inches in diameter, and if wood, not less than fifteen-sixteenths (15/16) inches in diameter (7/8 inch for bats less than 30”) at its smallest part. Wood bats taped or fitted with a sleeve may not exceed eighteen (18) inches from the small end. The bat shall not weigh, numerically, more than three ounces less than the length of the bat (e.g., a 33-inch-long bat cannot weigh less than 30 ounces). All bats not made of a single piece of wood shall meet either 1) the Batted Ball Coefficient of Restitution (BBCOR) performance standard, and such bats shall be so labeled with a silkscreen or other permanent certification mark which shall be rectangular, a minimum of a half-inch on each side, and located on the barrel of the bat in any contrasting color, or 2) the USA Bat standard and shall bear the USA Baseball logo signifying that the bat meets the USABat – USA Baseball’s Youth Bat Performance Standard. Aluminum/alloy and composite bats shall be marked as to their material makeup being aluminum/alloy or composite. This marking shall be silkscreen or other permanent certification mark, a minimum of one-half-inch on each side, and located on the barrel of the bat in any contrasting color.

In all divisions, a non-wood bat must have a grip of cork, tape, or composition material, and must extend a minimum of 10 inches from the small end. Slippery tape or similar material is prohibited.

NOTE 1: Whiffle ball type bats are permissible in all Challenger Divisions.

NOTE 2: The traditional batting donut is not permissible.

NOTE 3: Tee Ball bats maybe used in the Challenger Divisions. Under the USABat standard, certified Tee Ball bats (26” and shorter) will feature the USA Baseball mark and text which reads ONLY FOR USE WITH APPROVED TEE BALLS. All Tee Ball bats must feature the USA Baseball mark and accompanying text. Tee Ball bats that were produced and/or purchased prior to the implementation of the new standard can be certified using an Approved Tee Ball Sticker via the USA Baseball Tee Ball Sticker Program (USABaseballShop.com) beginning September 1, 2017.

NOTE 4: Non-wood bats may develop dents from time to time. Bats that have cracks or sharp edges, or that cannot pass through the approved Little League bat ring for the appropriate division must be removed from play. The 2¼-inch bat ring must be used for bats labeled 2¼. The 2⅝-inch bat ring must be used for bats labeled for 2⅝.

NOTE 5: An illegal bat must be removed. Any bat that has been altered shall be removed from play.

Rule 1.10 - Softball

The bat must be a softball bat which meets Little League specifications and standards as noted in this rule. It shall be a smooth, rounded stick and made of wood or a material tested and proved acceptable to Little League standards. The bat shall be no more than 33 inches (34 inches for Junior/Senior League) in length, not more than two and one-quarter (2¼) inches in diameter, and if wood, not less than fifteen-sixteenth (15/16) inches in diameter (7/8 inch for bats less than 30 inches) at its smallest part. Non-wood bats shall be printed with a BPF (bat performance factor) of 1.20. Bats may be taped or fitted with a sleeve for a distance not exceeding 16 inches from the small end. Colored bats are acceptable. A non-wood bat must have a grip of cork, tape or composition material, and must extend a minimum of 10 inches from the small end. Slippery tape or similar material is prohibited.

An illegal or altered bat must be removed.


In all divisions, non-wood bat must have a grip of cork, tape, or composition material, and must extend a minimum of 10 inches from the small end. Slippery tape or similar material is prohibited.

NOTE 1: The traditional batting donut is not permissible.

NOTE 2: The use of pine tar or any other similar adhesive substance is prohibited at all levels of Little League Baseball and Softball. Use of these substances will result in the bat being declared illegal and removed from play.

NOTE 3: Non-wood bats may develop dents from time to time. Bats that have cracks or sharp edges, or that cannot pass through the approved Little League bat ring for the appropriate division must be removed from play. The 2¼-inch bat ring must be used for bats labeled 2¼. The 2⅝-inch bat ring must be used for bats labeled for 2⅝.

NOTE 4: An illegal bat must be removed. Any bat that has been altered shall be removed from play. PENALTY - See Rule - 6.06(d).


by posted 10/29/2017
Calendar is loading...
Loading Weather...